Thursday, December 20, 2012
Kill Switch
This diagram shows how to install the Hard Wire Tracker with the Kill Switch relay.
The Kill Switch relay remotely disables the ignition from any location.
The Hard Wire Tracker provides real time tracking updates and installs behind the dashboard to remain completely inconspicuous.
The Hard Wire Tracker and Kill Switch relay require professional installation which can be done at any local Best Buy or Audio Shop.
OBD Tracker
The OBD Tracker is a real time vehicle tracker that installs within seconds.
The OBD Tracker provides updates every minute and runs off the battery of the car itself.
The OBD Tracker requires no professional installation.
Perfect for fleet tracking and to keep track of all your employees.
The OBD ii port is located directly underneath the steering column of the vehicle.
All cars manufactured after 1996 are required to have an OBD ii port inside the vehicle.
The Y Cable is an additional accessory that hides the OBD tracker while at the same time keeping the port open in case the vehicle needs to be serviced.
To install the Y Cable, just pop the original OBD port, replace the port with one of the female ends, plug the original OBD port into the male end, and finally plug the last female end into the OBD tracker.
Micro GPS Tracker
The MicroTracker is a small portable device that fits in the palm of your hand.
The MicroTracker is battery operated and provides real time tracking.
Place the MicroTracker on the object, person, or vehicle you would like to track and find out the exact location.
The magnetic clip is an additional accessory that connects the MicroTracker to any magnetic surface.
The MicroTracker comes with a wall charger, which connects to an AC outlet.
Just plug the MicroTracker into the wall charger and the device will be charged within hours.
The carry pouch is an additional accessory that can be used to hold the MicroTracker to provide for easy transport.
The carry pouch is perfect for travel and will keep the MicroTracker safe and secure.
The MicroTracker fits comfortably inside the pouch which makes it easy to place in a suitcase or purse.
The MicroTracker will protect all your valuables by placing it in a jewelry case. Know if your valuables are moved or tampered with.
The MicroTracker can be placed inside the carry pouch and placed inside a jewelry case or suitcase. Keep track of all your valuables and be notified of any unusual activity via text message or email.
The magnetic clip is an additional accessory for the MicroTracker that will attach the tracker to any magnetic surface.
The magnetic clip is a strong sturdy magnet that is very secure.
The magnetic clip attaches to the back of the Micro Tracker and from there can be attached to the top side of the frame of a vehicle.
The magnetic clip is an additional accessory and not included with the Micro Tracker.
The magnet installs within seconds and just simply snaps on to the back of the Micro Tracker.
Even with the magnetic clip, the Micro Tracker magnet combination fits in the palm of your hand.
The cigarette lighter charger keeps the Micro Tracker charged through the vehicle.
The cigarette lighter jack can normally be found near the console in the front of the vehicle or the trunk
The extended battery is an additional accessory that you connect the Micro Tracker with.
The extended battery will provide up to three months of extended battery life.
The extended battery has a strong magnet on the bottom that can be used to attach the Micro Tracker with extended battery to any magnetic surface.
Place the Micro Tracker inside the case alongside the extended battery.
The battery plugs into the small USB port of the Micro Tracker.
The hard wire power kit is an additional accessory that hard wires the Micro Tracker to the vehicle.
The power kit connects to the mini USB port of the Micro Tracker and then to the vehicle itself.
Increase the versatility of the tracking device by constantly keeping the device powered and eliminating the need to recharge the device.
Subscribe to:
Posts (Atom)
